Research Facility
Force Resistant Supporting Wall and Slab
- Specifications
-
- Reaction Force Wall
8m (W) x 10m (H) x 2m (T)
Allowable bending moment: 20,000kN/m
Maximum force: 2,000kN, H=7.5m - Reaction Force Floor
12m (W) x 15m (L)
- Reaction Force Wall
Vertical Load Testing System (Up to 3000kN capacity)
In principle, vertical load tests for beams and slab can be performed by load control or displacement control.
- Specifications
-
- Compute controlled electro-hydraulic servo machine
- Rated output: +3000kN (compression)
- Stroke: 600mm
Actuator Structural Experiment System
This structural experiment system consists of a loading frame, actuators, and static hydraulic jacks. It is possible to conduct high-precision structural experiment and pseudo-dynamic experiment by digital control. Additionally, a wide variety of experiment can be conducted with the use of static hydraulic jack.
- Actuator specifications
-
- Rated output: ± 1000kN (compression / tensile)
- Stroke: ± 300mm (2mm / sec)
- Static hydraulic jack (3000kN model) specifications
-
- Rated output: compression 3000kN, tensile 1500kN
- Stroke: ± 150mm
- Static hydraulic jack (500kN model) specifications
-
- Rated output: ± 500kN (compression, tensile)
- Stroke: ± 250mm
Universal Testing Machine (Testing capacity up to 3000kN)
This machine can be used to conduct various test including material compression test, tensile test, and bending test. It has a loading capacity up to 3,000 KN for both compression and tension tests.
- Tensile test (maximum distance between grippers: 4,000 mm)
-
- Round steel: Φ20 to Φ110
- Flat plate: 0 to 105 mm
- Deformed steel bars: D6 to D51
- Compression test (maximum pressure plate distance: 3,800 mm)
-
- Simple compression test
- Bending test
- 4m-length bending test
Fatigue Loading Test System
The fatigue loading test system consists of a servo pulsar type fatigue test device, control computer, a frame, a hydraulic pump, and a cooler. Through the computer control system, tests of repeated loading with the set maximum load value or maximum stroke value can be performed with ease.
- Specifications
-
- Rated output (dynamic): ± 500kN
- Rated output (static): ± 750kN
- Stroke: ± 75mm
Universal Testing Machine (Testing capacity up to 2000kN)
This testing machine can be used to perform uniaxial compression test and tensile test for various materials including concrete. The loading speed, etc. can be controlled by computer and measured o with high accuracy.
- Specifications
-
- Rated output (compression): + 2000kN
- Rated output (tensile): -1000kN
Controlled Temperature and Humidity Room
By using this temperature and humidity room, it is possible to manufacture, cure, and test concrete under various environment.
- Specifications
-
- Temperature: 0 to + 35°C
- Humidity: 40-90%
- Indoor dimensions: 6.3m x 5.0m x 2.3m (H)
Temperature and Humidity Adjustable Tank
Curing and testing under controlled temperature for various materials including concrete can be performed.
- Specifications
-
- Temperature: -25 to + 100°C
- Humidity: 20-98%
- Tank inner dimensions: 1.00m x 0.80m x 1.00m (H)
Seismograph
This seismograph used for seismic observation automatically operates when any acceleration is detected. The observed seismic wave will then be recorded through the recording device located in the measurement room on the 2nd floor.
- Inquiry by phone
-
Please contact us if you have any issues or inquiries
- TEL
- +81-3-6385-8050
- FAX
- +81-3-3536-6936
Reception time: Working days (Monday - Friday) 8:30-17:30
(Except for Saturday, Sunday, public holidays, new year, and corporate holidays)
- Inquiry by form
-
Reception is available 24 hours a day and 365 days a year